Hino 338



Dimensions Engine
Wheelbase  144 .in
Overall length  231.6 .in
Overall width  96.5 .in
Overall height  106.9 .in
Cab to axle  76.6 .in
Rear overhang  39 .in
Frame height at:     
Front axle  36.8 .in
Rear axle  40.6 .in
Road clearance (at diff. axle)  11.2 .in
Front  79.3 .in
Rear  72.2 .in
Turning radius:     
Tire  42 ft.
Wall to wall  45.4 ft.

Cab Equipment
Hand control valve  Dash mounted 
Trailer protection valve  With ABS warning lamp 
Cab construction  All steel welded 
Seating  Three-person 
Driver’s seat  Adjustable reclining, vinyl with air suspension 
Passenger’s seat  Bench type, vinyl (two passenger) 
Seat belts  3-point type (driver and passenger), one 2-point type (center) 
A/C  134 Denso 
Heater/Defroster  18,357 BTU/h 
Mirrors outside rearview  Four; one flat and one convex at each side 
Sun visors  Two – flip-down 
Overhead compartment  Two with latching doors 
Chrome grille  Standard 
Ventilator  Electric forced air 
Windshield  Laminated 
Windshield wipers  Dual electric, 2-speed and intermittent 
Cup holders  Standard 
Cigarette lighter  Standard 
Coat hook  One (rear panel) 
Door pockets  Two 
Air horn  Standard 
Cruise control  Standard 
Type  Diesel 4-cycle, 6-cylinder in-line, water-cooled
Combustion system  Direct injection type 
Max. output (SAE Gross)  260 hp at 2,500 rpm 
Max. torque (SAE Gross)  585 lb.-ft. at 1,500 rpm 
Bore and stroke  4.41 x 5.12 in. 
Piston displacement  7.680 L 
Fuel injection pump  Radial plunger (HP-4) 
Governor  Electronically controlled 
Intake system  Turbocharged and intercooled 
Air cleaner  Paper filter type (DONALDSON) 
Fan clutch  Bimetal thermostat sensor regulates fan speed 
Glow plugs  Standard 
Air compressor  Single cylinder, 10.0 cfm @ 1,250 rpm 

Cloth seats 
Single passenger’s seat – Adjustable reclining 
Lubricated front wheel bearings 
Clutch (Dry single plate with auto adjuster –SAS 1401 Solo) 
Clutch (Dry twin plate with auto adjuster –SAS 1402 Solo) 
Cold weather package (includes) 
Heated mirrors 
Block heater 
Heated air dryer (Bendix) 
Front Bumper (three pieces) 
Front Bumper (three pieces with 4 inch extension/black) 
Front Bumper (4 inch extension / black) 
Front Bumper (chrome) 
Front Bumper (4 inch extension/chrome) 
Alternator – 12 V, 105 A, brushless 
Battery – 12 V GR31; GR31 x 3; GR27 x 3 
Fuel tank – dual 52 gal./US; 95 gal./US 
Air dryer – Bendix type without heater 
Tires — Fr: rib, Rr: rib 
Air horn 
Rear axle – Meritor RS23-160 
120k PSI frame (specific to wheelbase) 
Exhaust system – Stack tail type; vertical stack 
RH freestanding vertical exhaust with chrome heat shield (not available with 95 gallon single RH fuel tank) 
Rear shock absorbers 
Chrome mirrors 
Power windows 
Hendrickson air suspension (specific to wheelbase) 
Electric central dump valve 
Synthetic fluids – transmission/rear differential 
Cab paint – red or black 
Safety kit (fire extinguisher and triangle kit) 
Rear stabilizer 
Aluminum wheels 
Exhaust brake – Electric-pneumatic with valve in exhaust pipe 
Locking differential with cab controls 
Hall Volvo GMC is the premier heavy duty and medium duty truck sales and service center for East Texas. Servicing all of Smith County and beyond with mobile service, parts delivery and sales of all types of trucks for all applications. We are the franchise New Truck Dealer for Volvo, GMC Medium Duty, Isuzu Trucks and the exclusive Hino Truck Dealer for this area. Hall Volvo GMC is in the rose capital of the United States, Tyler Texas
 |   |